Wrench (adjustable wrench/socket wrench)

Purpose:

Used to tighten or remove bolts (such as water tank module connection bolts, flange bolts).

Socket wrench is more suitable for narrow spaces, and adjustable wrench can adjust the opening to adapt to different sizes.

Notes:

Choose specifications that match the bolts.

Purchase suggestions:

Preferably choose steel material, which is wear-resistant; socket wrench with extension rod is more labor-saving.

Hole opener

Purpose:

Drill holes (such as water inlet and outlet, vent) on the water tank wall or flange.

Notes:

Use a marker to accurately locate the hole before drilling, and apply tape to reduce burrs.

Purchase suggestions:

Choose a hole opener with a carbide tip, and the hole diameter must match the pipe size.

Scissors (industrial scissors/heavy-duty scissors)

Purpose:

Cut sealing strips, rubber gaskets or protective films.

Notes:

Avoid cutting metal parts to prevent damage to the blade.

Purchase suggestions:

Choose stainless steel material, length of more than 20cm, and non-slip handle.

Tape measure (more than 5 meters)

Purpose:

Measure the foundation size, alignment accuracy of the water tank module, bolt spacing, etc.

Notes:

Straighten the measurement to avoid errors caused by bending.

Purchase suggestions:

Choose a steel tape measure with double-sided scale and anti-rust coating, with an accuracy of ±1mm.

Screwdriver (cross/slotted)

Purpose:
Install accessories (such as liquid level gauges, valve screws), adjust fasteners.

Notes:

Select the corresponding model according to the screw head type to avoid slipping and damaging the screw.

Purchase suggestions:

Select magnetic tool heads for easy installation of small screws; handle insulation material is safer.

Pliers

Purpose:

Clamp or bend metal parts;

Cut cable ties and wires;

Fine operations (such as adjusting sealing strips).

Notes:

Wear goggles when cutting metal wires to prevent debris from splashing.

Purchase suggestions:

Select high-carbon steel pliers with anti-slip handles.

Glue gun

Purpose:

Inject sealant (such as silicone, epoxy resin) to fill the joints to ensure that the water tank is waterproof.

Notes:

The glue nozzle needs to be cut at an angle to facilitate accurate caulking;

Use a scraper to smooth it out in time after applying the glue.

Purchase suggestions:

Manual glue guns are suitable for small-area operations, and electric glue guns are uniform and efficient.

Gloves (anti-slip labor gloves)

Purpose:

Protect your hands from scratches caused by burrs and increase friction during handling.

Notes:

Choose a design that fits your hand to avoid affecting operational flexibility.

Purchase suggestions:

Nitrile or latex coated gloves are anti-slip and corrosion-resistant.

Hammer (rubber hammer/iron hammer)

Purpose:

Rubber hammer: tap to adjust the position of the water tank module to avoid hard damage;

Iron hammer: tap the expansion bolt or crowbar to assist in positioning.

Notes:

When using an iron hammer, a wooden board should be placed to prevent direct impact on the surface of the water tank.

Purchase suggestions:

Select a rubber hammer with a weight of 0.5-1kg and an iron hammer with a weight of 2-4 pounds.

Utility knife (heavy-duty knife)

Purpose:

Cut the sealing strip, trim the excess glue or burrs at the joint.

Precautions:

Keep the blade sharp, apply force outward when cutting to avoid hurting your hands.

Purchase suggestions:

Choose a metal handle utility knife with replaceable blades, with a blade thickness of ≥0.5mm.

Electric drill (cordless/wired)

Purpose:

Drill holes on the foundation to install expansion bolts, or open holes for pipe connections.

Precautions:

Keep the hole vertical when drilling, and the water tank hole needs to be opened at a low speed.

Purchase suggestions:

Choose a power of 550W or more, with a speed adjustment function; choose a carbide or diamond-coated drill bit.

Electric wrench (impact wrench)

Purpose:

Quickly tighten or remove large bolts (such as flange bolts) to improve efficiency.

Precautions:

Use with a sleeve to ensure that it fits the bolts completely.

Purchase suggestions:

Choose a brushless motor model with a torque range of 100-300N·m and a reverse steering function.

General principles for tool use
Safety first: wear goggles, gloves, etc.

Precision control: Measurement and hole opening need to be repeatedly checked to avoid rework.

Tool maintenance: Clean debris after use and lubricate moving parts regularly.